Every 10 sec is very do-able even with a PC running Windows.
You can do it with just 1 meter if you have some way of switching.
Or 2 meters or 1 meter and a scope.
cappettoa wrote:I am trying to interface the Keithley 2001 DMM using GPIB-USB.
I have never used GPIB or LabVIEW before
Do you have a GPIB-USB and GPIB cables to connect your meter to your PC?
Do you have LabVIEW loaded (with the VISA drivers)?
Open/Run NI MAX (Measurement & Automation Explorer)
Expand "Devices and Interfaces" and look for your GPIB-USB controler and click on it.
Click on "Scan for Instruments" and see if your meter is found.
If MAX can not find your meter, nothing in LabVIEW will!
Let us know when you have gotten that far.