Re: Beginner questions - sampling and plotting.

I guess I could just adjust the timeout value of the DAQ assistant in the first VI i posted, and this would allow me to input a lower sampling frequency directly in the DAQ assistant? I don't have Labview at home, so I can't try it out rightnow, but it is an acceptable solution? As it is explained here:
http://digital.ni.com/public.nsf/allkb/FEF778AD990D5BD886256DD700770103?OpenDocument
http://digital.ni.com/public.nsf/allkb/3161AE266063C6A186256D360045E927

I also found this VI while searching for solutions, but I am having problems integrating it. Is there a easier solution?
https://decibel.ni.com/content/docs/DOC-9065